Publications | Alfonso Pozio

O. Racchi, R. Baldassari, E. Araya-Hermosilla , V. Mattoli, P. Minei, A. Pozio, A. Pucci, “Polyketone-Based Anion-Exchange Membranes for Alkaline Water Electrolysis”, Polymers, 15/9, (2023), 2027 –
S. Rakhshani, R. Araneo, A. Pucci, A. Rinaldi, C. Giuliani and A. Pozio, “Synthesis and Characterization of a Composite Anion Exchange Membrane for Water Electrolyzers (AEMWE)”, Membranes, 13/1, (2023), 109 –
A. Pozio, S. Galli, “The role of hydrogen from electrolysis in the overproduction of energy from renewable sources”, IOP Conf. Ser.: Mater. Sci. Eng. 1265 012001 –
A. Pozio, F. Bozza, N. Lisi, R. Chierchia, F. Migliorini, R. Dondè, S. De Iuliis, “Cobalt Oxide Synthesis via Flame Spray Pyrolysis as Anode Electrocatalyst for Alkaline Membrane Water Electrolyzer”, Materials, 15/13, (2022), 4626 –
A. Giaconia, S. Tosti, G. Caputo, A. Pozio, “Combustibili Green da rifiuti ed energie rinnovabili”, La Chimica e l’Industria, 3, (2022), 57-52 –
A. Crialesi, B. Mazzarotta, M. Santalucia, F. Di Caprio, A. Pozio, A. Santucci, L. Farina, “Exploiting Olive Mill Wastewater via Thermal Conversion of the Organic Matter into Gaseous Biofuel—A Case Study”, Energies, 15, (2022), 2901 –
A. Pozio, M. Di Carli, A. Aurora, M. Falconieri, L. Della Seta, P.P., Prosini, “Hard Carbons for Use as Electrodes in Li-S and Li-ion Batteries”, Nanomaterials, 12, (2022), 1349 –
A. Pozio, A. Aurora, L. Della Seta, A. Santucci, S. Tosti, “Titanium Electrical Resistivity in Hydrogen and Deuterium”, Journal of Materials Engineering and Performance, (2022) –
A. Pozio, S. Galli, “Il ruolo dell’idrogeno da elettrolisi nella sovrapproduzione di energia da fonti rinnovabili – Parte II”, La Chimica e l’Industria, 1, (2022), 42-48 –
A. Pozio, S. Galli, “Il ruolo dell’idrogeno da elettrolisi nella sovrapproduzione di energia da fonti rinnovabili – Parte I”, La Chimica e l’Industria, 6, (2021), 60-62 –
A. Pozio, F. Bozza, N. Lisi, F. Mura, “Electrophoretic deposition of cobalt oxide anodes for alkaline membrane water electrolyzer”, International Journal of Energy Research, (2021), 1-12 –
S. Tosti, L. Farina, A. Pozio, A. Santucci, D. Aliquè, “Study of a stainless steel porous membrane for recovering tritium from Pb-Li alloys: Assessment of mass transfer coefficient”, Fusion Engineering and Design, 168, (2021), 112423 –
S. Tosti, A. Pozio, L. Farina, A. Santucci, “Hydrogen and Oxygen Production via Water Splitting in a Solar-Powered Membrane Reactor—A Conceptual Study”, Hydrogen, 2/1, (2021), 18-32 –
D. Colognesi, F. Demmel, A. Filabozzi, A. Pietropaolo, A. Pozio, G. Romanelli, A. Santucci, S. Tosti, “Proton Dynamics in Palladium–Silver: An Inelastic Neutron Scattering Investigation”, Molecules 25, (2020), 5587 –
S. Tosti, A. Pozio, L. Farina, M. Incelli, A. Santucci, D. Alique, “Membrane gas-liquid contactor for tritium extraction from Pb-Li alloys”, Fusion Engineering and Design, 158, (2020), 111737 –
A. Pozio, N. Lisi, L. Della Seta, S. Dolci, C. D’Angelo, “Effect of cobalt deposition on Ni anodes for alkaline membrane water electrolyser”, Materials Chemistry and Physics, 242, (2020), 122537 –
A. Pozio, A. Aurora, P.P. Prosini, “Hard carbon for sodium batteries: Wood precursors and activation with first group hydroxide”, Journal of Power Sources, 449, (2020), 227555 –
A. Pozio, S. Tosti, “Pd-Ag Electrical Resistivity in Hydrogen and Deuterium: Temperature Effect”, Materials, 12/21, (2019), 3551 –
A. Pozio, Z. Jovanovic, S. Tosti, “Hydrogen Absorption in Pd–Ag Systems: a TPD and Electrical Resistivity Study”, Materials, 12/19, (2019), 3160 –
S. Tosti, M.A Sousa, G. Buceti, L.M. Madeira, A. Pozio, “Process analysis of refuse derived fuel hydrogasification for producing SNG”, International Journal of Hydrogen Energy, 44, (2019) 21470-21480 –
G. Caputo, I. Balog, A. Giaconia, S. Sau, A. Pozio, “Experimental Study for HI_x Concentration by Electro-Electrodialysis (EED) Cells in the Water Splitting Sulfur-Iodine Thermochemical Cycle”, Chem Engineering, 3/2, (2019) 50 –
A. Moriani, O. Palumbo, S. Tosti, A. Santucci, A. Pozio, F. Trequattrini, A. Paolone, “An Innovative Procedure to Evaluate the Hydrogen Diffusion Coefficient in Metals from Absorption Measurements”, Energies, 12/9, (2019) 1652 –
A. Pozio, S. Tosti, “Isotope effects H/D in a PEFC with Pt-Ru/anode at low and high current density”, International Journal of Hydrogen Energy, 44, (2019) 7544-7454 –
E. Barbuzza, G. Buceti, A. Pozio, M. Santarelli, S. Tosti, “Gasification of wood biomass with renewable hydrogen for the production of synthetic natural gas”, FUEL, 42, (2019) 520-531 –
S. Tosti, A. Pozio, “Membrane Processes for the Nuclear Fusion Fuel Cycle”, Membranes, 8(4), (2018) –
S. Tosti, G. Buceti, A. Pozio, “Idrogassificazione di rifiuti”, La Chimica e l’Industria 4/8, (2017) –
M. Catti, O. Fabelo, A. Filabozzi, A. Pietropaolo, S. Tosti, A. Pozio, A. Santucci, “Neutron diffraction study of the Pd_0.772Ag_0.228D_V membrane for hydrogen separation”, International Journal of Hydrogen Energy, 42/10, (2017) 6787-6792 –
A. Pozio, M. Carewska, A. Santucci, S. Tosti, “Behaviour of hydrogenated lead-lithium alloy”, International Journal of Hydrogen Energy, 42/2, (2017) 1053-1062 –
A. Pozio, A. Masci, M. Pasquali, “Nickel-TiO₂ nanotube anode for photo-electrolysers”, Solar Energy 136, (2016) 590-596 –
S. Tosti, G. Spazzafumo, D. Capobianco, G. Buceti, A. Pozio, S. Bartucca, “EU scenarios of renewable coal hydro-gasification for SNG production”, Sustainable Energy Technologies and Assessments 16, (2016), 43-52 –
F. Scaramuzzo, A. Pozio, A. Masci, F. Mura, A. Pozio, A. Dell’Era, A. Curulli, M. Pasquali, “Efficient photocurrent generation using a combined Ni-TiO₂nanotubes anode”, J Appl Electrochem 45, (2015), 727-733 –
A. Pozio, A. Masci, M. Pasquali, “Composite Ni-TiO₂ nanotube arrays electrodes for photo-assisted electrolysis”, Advances in Energy Research, 3/1, (2015) 45-57 –
S. Tosti, G. Buceti, A. Pizzuto, A. Pozio, “Gas Naturale da Carbone ed Eolico – Un’alternativa alle importazioni di gas naturale dell’Unione Europea dalla Russia”, La Chimica e l’Industria 2/4, (2015) –
A. Pozio, “Effect of Tantalum Doping on TiO₂ Nanotube Arrays for Water-Splitting”, Modern Research in Catalysis, 4/1, (2015), 1-12 –
F. Scaramuzzo, M. Pasquali, F. Mura, A. Pozio, A. Dell’Era, A. Curulli, “TiO₂ nanotubes Photo-anode: an Innovative Cell Design”, Chemical Engineering Transactions, 41, (2014), 223-228 –
A. Pozio, A. Masci, M. Pasquali, “A combined anode nickel-titanium dioxide nanotube for photo-electrolysis”, Energia, Ambiente ed Innovazione, 6, (2014), 97-103 –
A. Pozio, “Effect of Low Cobalt Loading on TiO₂ Nanotube Arrays for Water-Splitting”, International Journal of Electrochemistry, vol. 2014, Article ID 904128, 7 pages, (2014) –
A. Pozio, M. De Francesco, S. Galli, “Low-temperature studies of hydrocarbon synthesis”, Energia, Ambiente ed Innovazione, 2/3, (2014), 86-92 –
P.P. Prosini, C. Cento, A. Pozio, “Lithium-ion batteries based on titanium oxide, nanotubes and LiFePO₄“, Journal of Solid State Electrochemistry, 18/3, (2014), 795-804 –
P.P. Prosini, C. Cento, A. Pozio, “Tyzor^TM-LA used as a precursor for the preparation of carbon coated TiO₂“, Journal of Power Sources, 248, (2014), 1021-1027 –
A. Pozio, M. Carewska, F. Mura, R. D’Amato, M. Falconieri, M. De Francesco, G.B. Appetecchi, “Composite anodes based on nanotube titanium oxide from electro-oxidation of Ti metal substrate”, Journal of Power Sources, 247, (2014), 883-889 –
S. Tosti, A. Pizzuto, A.Pozio, “Produzione di metano da carbone con l’uso di fonti energetiche rinnovabili”, La Chimica e l’Industria, 08 (2013) 126-134 –
S. Tosti, A. Pizzuto, A.Pozio, “Idrogassificazione del carbone del Sulcis. Carbone ed eolico per produrre metano”, ICP – Rivista dell’Industria Chimica, Anno XL, 10 (2013) 64-68 –
P.P. Prosini, C. Cento, A. Pozio, “Electrochemical characterization of titanium oxide nanotubes”, Electrochimica Acta, 111 (2013) 120-125 –
A. Dell’Era, F. Mura, M. Pasquali, A. Pozio, F. Zaza, “Synthesis and characterization of TiO₂ nano-tubes as anodic material in Lithium-ion batteries”, Il Nuovo Cimento, 36C/2, (2013) 65-72 –
A. Pozio, A. Palmieri, A. Girardi, F. Cura, F. Carinci, “Titanium nanotubes activate genes related to bone formation in vitro”, Dental Research Journal, 9/8 (2012) S164-S168 –
A. Pozio, A. Palmieri, A. Girardi, F. Cura, F. Carinci, “Titanium nanotubes stimulate osteoblast differentiation of stem cells from pulp and adipose tissue”, Dental Research Journal, 9/8 (2012) S169-S174 –
A. Pozio, Z. Jovanovic, R. Lo Presti, M. De Francesco, S. Tosti, “Pd-Ag hydrogen content and electrical resistivity: Temperature and pressure effect”, Int. Journal of Hydrogen Energy, 37 (2012) 7925-7933 –
Z. Jovanovic, M. De Francesco, S. Tosti, A. Pozio, “Influence of surface activation on the hydrogen permeation properties of PdAg cathode membrane”, Int. Journal of Hydrogen Energy, 36 (2011) 15364-15371 –
Z. Jovanovic, M. De Francesco, S. Tosti, A. Pozio, “Structural modification of PdAg alloy induced by electrolytic hydrogen adsorption”, International Journal of Hydrogen Energy, 36 (2011) 7728-7736 –
A. Pozio, M. De Francesco, Z. Jovanovic, S. Tosti, “Pd-Ag hydrogen diffusion cathode for alkaline water electrolysers”, International Journal of Hydrogen Energy, 36 (2011) 5211-5217 –
A. Pozio, A. Cemmi. F. Mura, A. Masci, E. Serra, R.F. Silva, “Long-term durability study of perfluoropolymers membranes in low humidification conditions”, Journal of Solid State Electrochemistry, 15/6 (2011), 1209 –
A. Pozio, A. Cemmi, F. Mura, A. Masci, and R. F. Silva, “Study on the Durability of Recast Nafion^TM/Montmorillonite Composite Membranes in Low Humidification Conditions,” Int. Journal of Electrochemistry, vol. 2011, Article ID 252031, 5 pages, (2011). –
A. Pozio, A. Cemmi, “La produzione dell’idrogeno mediante elettrolisi”, La Chimica e l’Industria, 12 (2010) 108-113 –
S. Galli, M. De Francesco, G. Monteleone, R. Oronzio, A. Pozio, ” Development of a compact hydrogen generator from sodium borohydride”, Int. Journal of Hydrogen Energy 35/14 (2010) 7344-7349 –
A. Pozio, A. Cemmi, M. Carewska, C. Paoletti, F. Zaza, “Characterization of GDE for polymer electrolyte fuel cells”, J. Fuel Cell Sci. Technol. 7/4 (2010) 0410031-0410037 –
F. Mura, A. Masci, M. Pasquali, A. Pozio, “Stable TiO₂ nanotube arrays with high UV photoconversion efficiency”, Electrochimica Acta 55 (2010) 2246-2251 –
C. Paoletti, A. Cemmi, E. Serra, A. Pozio, “PEFC electrodes based on carbon black supportino electrocrystallised nanostructured Pt particles”, Int. J. Nanomanufacturing, Vol. 5, Nos. 1/2, 2010 –
R. Oronzio, G. Monteleone, A. Pozio, M. De Francesco, S. Galli, “New reactor design for catalytic sodium borohydride hydrolysis”, International Journal of Hydrogen Energy 34 (2009) 4555-4560 –
F. Mura, M. Pasquali, A. Masci, A. Pozio, “Effect of a galvanostatic treatment on the preparation of highly ordered TiO₂ nanotubes”, Electrochimica Acta 54 (2009) 3794-3798 –
A. Giaconia, G. Caputo, S. Sau, P.P. Prosini, A. Pozio, M. De Francesco, P. Tarquini, L. Nardi “Survey of Bunsen reaction routes to improve the Sulfur-Iodine thermochemical water-splitting cycle”, International Journal of Hydrogen Energy 34 (2009) 4041-4048 –
J.Wu, S. Galli, I. Lagana, A. Pozio, G. Monteleone, X. Z. Yuan, J. Martin, H.Wang, “An air-cooled proton exchange membrane fuel cell with combined oxidant and coolant flow”, Journal of Power Sources 188 (2009) 199-204 –
A. Pozio, R. F. Silva, A. Masci, “Corrosion study on SS430/Nb as bipolar plate materials for PEMFCs”, International Journal of Hydrogen Energy, 33 (2008) 5697-5702 –
A. Pozio, F. Zaza, A. Masci, R.F. Silva, “Bipolar plate materials for PEMFCs: A conductivity and stability study”, Journal of Power Sources 179 (2008) 631-639 –
A. Pozio, M. De Francesco, G. Monteleone, R. Oronzio, S. Galli, C. D’Angelo, M. Marrucci, “Apparatus for the production of hydrogen from sodium borohydride in alkaline solution” International Journal of Hydrogen Energy 33 (2008) 51 – 56 –
R.F. Silva, A. Pozio, “Corrosion Study on Different Types of Metallic Bipolar Plates for Polymer Electrolyte Membrane Fuel Cells”, Journal of Fuel Cell Science and Technology, 4/2 2007, 116-121 –
M. E. Lorenzelli, A. Pozio, “L’impatto scientifico dell’Italia in Europa”, La Chimica e l’Industria, 4, (2007), 102-109 –
F. Mura, R.F. Silva, A. Pozio, “Study on the conductivity of recast Nafion^TM/montmorillonite and Nafion^TM/TiO₂ composite membranes”, Electrochimica Acta, 52 2007 5824-5828 –
A. Pozio, M. De Francesco, G. Monteleone, R. Oronzio, S. Galli, C. D’Angelo, M. Marrucci, “L’accumulo chimico dell’idrogeno mediante NaBH₄ – parte 2″, La Chimica e l’Industria, 2 2007, 86-91 –
A. Pozio, M. De Francesco, G. Monteleone, R. Oronzio, S. Galli, “Immagazzinamento e generazione di idrogeno da boroidruri alcalini”, Energia, Ambiente ed Innovazione, 1 2007, 46-59 –
A. Pozio, M. De Francesco, G. Monteleone, R. Oronzio, S. Galli, “L’accumulo chimico dell’idrogeno mediante NaBH₄ – parte 1″, La Chimica e l’Industria, 1 2007, 118-125 –
R.F. Silva, D. Franchi, A. Leone, L. Pilloni, A. Masci, A. Pozio, “Surface conductivity and stability of metallic bipolar plate materials for polymer electrolyte fuel cells”, Electrochimica Acta 51/17 2006, 3592-3598 –
M. Pizzichini, A. Pozio, C. Russo, “Home drinking-water purifiers”, Energia, Ambiente ed Innovazione, 4/05 Luglio Agosto 2005, 65 – –
R. F. Silva, S. Passerini, A. Pozio, “Solution-cast Nafion^TM/montmorillonite composite membrane with low methanol permeability”, Electrochimica Acta, 50/13 2005, 2639-2645 –
R. F. Silva, M. De Francesco, A. Pozio, “Tangential and normal conductivities of nafion^TM membranes used in polymer electrolyte fuel cells”, Journal of Power Sources, 134/1 2004, 18-26 –
R. F. Silva, M. De Francesco, A. Pozio, “Solution-cast nafion^TM ionomer membranes: preparation and characterisation”, Electrochimica Acta, 49/19 2004, 3211-3219 –
R. F. Silva, M. De Francesco, L. Giorgi, M. C. Campa, F. Cardellini, A. Pozio, ” Highly stable Pt-Ru/C as an anode catalyst for use in polymer electrolyte fuel cells”, Journal of Solid State Electrochemistry, 8/8 2004, 544-549 –
K. Zhukovsky, A. Pozio, “Maximum current limitations of the PEM fuel cell with serpentine gas supply channels”, Journal of Power Sources, 130/1-2 2004, 95-105 –
A. Pozio, S. Galli, M. De Francesco, A. Danzi, R. Lo Presti, R.F. Silva, L. Giorgi, “Membrane Electrode Gasket Assembly (MEGA^TM): a novel technology for PEFCs”, Journal of New Materials for Electrochemical Systems, 6/3, 2003, 157-162 –
P. Prosini, A. Pozio, S. Botti, R. Ciardi, “Electrochemical studies of hydrogen evolution, storage and oxidation on carbon nanotubes electrodes”, Journal of Power Sources, 118, 2003, 265-269 –
A. Pozio, M. De Francesco, R.F. Silva, L. Giorgi, “Nafion^TM degradation in PEFCs from end plate iron contamination”, Electrochimica Acta, 48, 2003, 1543-1549 –
M. Ceraolo, C. Miulli, A. Pozio, “Modelling static and dynamic behaviour of proton exchange membrane fuel cell on the basis of electro-chemical description”, Journal of Power Sources, 113 2003, 131-144 –
A. Pozio, M. De Francesco, F. Cardellini, R.F. Silva, L. Giorgi, “A novel route to prepare stable Pt-Ru/C electrocatalysts for polymer electrolyte fuel cell”, Erratum – Electrochimica Acta 48/11, 2003, 1627-1634 –
A. Pozio, M. De Francesco, F. Cardellini, R.F. Silva, L. Giorgi, “A novel route to prepare stable Pt-Ru/C electrocatalysts for polymer electrolyte fuel cell”, Electrochimica Acta, 48/3 2002, 255-262 –
A. Pozio, M. De Francesco, A. Danzi, R. Lo Presti, R.F. Silva, L. Giorgi, “Membrane Electrode Gasket Assembly (MEGA^TM) technology for polymer electrolyte fuel cells”, Journal of Power Sources, 112/2, 2002, 491-496 –
A. Pozio, M. De Francesco, A. Cemmi, F. Cardellini, L. Giorgi, “Comparison of high surface Pt/C catalysts by cyclic voltammetry”, Journal of Power Source 105, 2002, 13-19 –
L. Giorgi, A. Pozio, C. Bracchini, R. Giorgi, S. Turtu’, “H₂ and H₂/CO oxidation mechanism on Pt/C, Ru/C and Pt-Ru/C electrocatalyst”, Journal of Applied Electrochemistry 31, 2001, 325-334 –
A. Pozio, L. Giorgi, E. Antolini, E. Passalacqua, “Electroxidation of H₂ on Pt/C, Pt-Ru/C and Pt-Mo/C anodes for polymer electrolyte fuel cell”, Electrochimica Acta 46, 2000, 549-555 –
E. Antolini, L. Giorgi, A. Pozio, E. Passalacqua, “Influence of Nafion^TM loading in the catalyst layer of gas-diffusion electrodes for PEFC”, Journal of Power Source 77, 1999, 136-142 –
L. Giorgi, A. Pozio, E. Simonetti, A. Moreno, “Cathode materials for molten carbonate fuel cells”, in Carbonate Fuel Cell Technology. Eds. G. Halpert, K. Hemmes, G. Lindbergh, J. R. Selman, D. A. Shores and I. Uchida, The Electrochemical Society Pub., PV 99-20, 1999
L. Giorgi, E. Antolini, A. Pozio, E. Passalacqua, “Influence of PTFE content in the diffusion layer of low-Pt loading electrodes for polymer electrolyte fuel cells”, Electrochimica Acta 43, 1998, 3675 –
P. Ascarelli, R. Giorgi, S. Turtu’, G. Zollo, L. Giorgi, E. Antolini, A. Pozio, “Anomalous behaviour of surface chemical species in solid polymer fuel cell materials evidenced by XPS”, 7th European Conference on Applications of Surface and Interface Analysis, eds. I. Olejjord, L. Nyborg, D. Briggs, John Wiley & Sons, New York, 1998
L. Giorgi, E. Antolini, A. Pozio, E. Passalacqua, “Morphological characteristics of carbon/polytetrafluoroethylene films deposited on porous carbon support”, Journal of Material Science, 33, 1998, 1837 –
E. Antolini, L. Giorgi, A. Pozio, “Development of gas diffusion electrodes for polymer electrolyte fuel cells”, Materials Technology, 13, 1998, 64-67 –
L. Giorgi, A. Pozio, “Nickel anodes in situ activation with cobalt in alkaline electrolyzers”, Preceedings of the First World Conference on Environmental Catalysis for a better World and Life Vol. 1 (1995), pp.647-650, Societa’ Chimica Italiana, Roma, Italia –