Conferences

  • M. Di Carli, M. Moreno, G. Tarquini, A. Pozio, A. Aurora, L. Della Seta, P.P. Prosini, “Development of high capacity lithium sulphur batteries”, ELECTRIMACS 2019 – Salerno, Italy, 21-23 May 2019  –

  • L. Pietrelli, A.Pozio, S. McPhail, “Valuable material recovery from spent PEM fuel cells”, Fuel Cells 2016 Science and Technology, April 13-14, 2016, Glasgow (UK) –

  • S. Tosti, G. Buceti, A. Pozio, G. Spazzafumo, D. Capobianco, “Coal hydro-gasification and renewable energies for SNG production”, SET Plan Conference 2014, 10-11 December, Rome, Italy –  Best Poster Award – 

  • F. Scaramuzzo, M. Pasquali, F. Mura, A. Pozio, A. Dell’Era, A. Curulli, “TiO2 nanotubes for photoelectrocatalytic water splitting: an innovative cell design”, 10th European Symposium on Electrochemical Engineering (ESEE), September 28 – October 2, 2014, Cagliari, Italy – 

  • V. Corato, U. Besi Vetrella, G. De Marzi, C. Fiammozzi Zignani, M. Moreno, A. Pozio, M. Carewska, G. Grimaldi, “Fabrication and physical characterization of electrochemically deposited and sintered chalcogenides superconductor”, ASC 2014, August 10-15, 2014, Charlotte NC, USA – 

  • U. Besi Vetrella, V. Corato, G. De Marzi, G. Frucci, M. Moreno, A.Pozio, “Fabrication and physical characterization of electrochemically deposited FeSe”, 11th European Conference on Applied Superconductivity, September 15-19, 2013, Genova, Italy – 

  • S. Tosti, A. Pozio, A. Santucci, M. Sansovini, “Hydrogen solubility and electrical resistivity measurements of hydrogenated Pb-Li”, 25th Symposium on Fusion Engineering, June 10-14, 2013, San Francisco, California – – DOI: 10.1109/SOFE.2013.6635456 – 

  • A. Dell’Era, F. Mura, M. Pasquali, A. Pozio, F. Zaza, “Synthesis and characterization of TiO2 nano-tubes as anodic material in Lithium-ion batteries”, VII Nanoforum, Rome, September 24-26, 2012 – 

  • R. Lo Presti, A. Pozio, F. Leccese, A. Zignani, “Development of Electrochemical Impedance Spectroscopy instrument for survey on fuel cell”, 11thInternational Conference on Environment and Electrical Engineering (EEEIC), Venice, 18-25 May 2012 – DOI: 10.1109/EEEIC.2012.6221402 – 

  • A. Pozio, A. Cemmi, F. Mura, R.F. Silva, “Solution-Cast NafionTM Composite Membrane Durability Study”, Third European Fuel Cell Technology and Applications, “Piero Lunghi Conference”, EFC2009, December 15-18, 2009, Rome, Italy – 

  • A. Cemmi, C. Paoletti, A. Pozio, E. Serra, “Electro-deposited Platinum on Activated Multiwall Carbon Nanotubes: Single-Cell Tests, Morphological and Electrochemical Characterizations”, Third European Fuel Cell Technology and Applications, “Piero Lunghi Conference”, EFC2009, December 15-18, 2009, Rome, Italy – 

  • F. Mura, A. Pozio, M. Pasquali, A. Masci, “Stable TiO2 nanotube arrays with high UV photo-conversion efficiency”, HYSYDAYS – 3rd World Congresso of Young Scientists on Hydrogen Energy System, 7-9 October 2009, Torino (Italy) – 

  • F. Mura, M. Pasquali, A. Pozio, A. Masci, “Effect of a galvanostatic treatment on the preparation of highly ordered TiO2 nanotubes”, FIGIPAS 10th –  The 10th intErnational Meeting in Inorganic Chemistry, 1-4 July 2009, Palermo (Italy) –

  • G. Monteleone , E. Calo’, M. De Francesco, S. Galli, A. Giannini, V. Naticchioni, R.Oronzio, A. Pozio, “Studio delle reazioni catalitiche in scala da laboratorio in ENEA”, New Energy Frontiers, 17-19 June 2009, Gaeta, Italy – 

  • S. Galli, M. De Francesco, G. Monteleone, R. Oronzio, A. Pozio, “Development of a Compact Hydrogen Generator from Sodium Borohydride”, Hypothesis, April 3, 2009, Lisbon, Portugal – 

  • G. Caputo, A. Giaconia, S. Sau, A. Pozio, A. Spadoni, C. Felici, M. De Francesco, “Evaluation on the electro-electrodialysis to concentrate HI from HI/H2O/I2 mixture in S-I thermochemical cycle using new electrode”, 17th World Hydrogen Energy Conference (WHEC2008) 15-19 June 2008, Brisbane, Australia – 

  • A. Cemmi, C. Paoletti, M. Pasquali, A. Pozio, E. Serra, “Membrane-electrode assembly optimization for polymer electrolyte membrane electrolyzers”, 2nd Int. Conf. On Advanced Nano Materials ANM 2008, 22-25 June 2008, Aveiro (Portugal) – 

  • C. Paoletti, A. Cemmi,, E. Serra, A. Pozio, “PEFC electrodes based on carbon black supporting electro-crystallized nanostructured Pt particles”, 2nd Int.Conf. On Advanced Nano Materials ANM 2008, 22-25 June 2008, Aveiro (Portugal) – 

  • A. Cemmi, M. Pasquali, A. Pozio, A. Masci, E. Serra, M. De Francesco, “Platinum catalysed membranes for solid polymer electrolyzers”, NANOTECH 2008, 10-14 March 2008, Venezia (Italy) – 

  • F. Mura, M. Pasquali and A. Pozio, “TiO2-based photoelectrochemical hydrogen production: a state-of-art.”, NANOTECH 2008, 10-14 March 2008, Venezia (Italy) – 

  • A. Pozio, A. Cemmi, M. Carewska, C. Paoletti, F. Zaza, “Characterization of GDE for polymer electrolyte fuel cell”, Second European Fuel Cell Technology and Applications Conference,  EFC2007, December 11-14, 2007, Rome, Italy – 

  • S. Baccaro, L. Giorgi, R. Giorgi, E. Serra, A. Pozio, A. Cemmi, C. Paoletti, “Radiation effects on platinum nanostructured electrocatalysts for polymer electrolyte fuel cells”, 10th ICATPP Conference on Astroparticles, Particles, Space Physics, Detectors and Medical Physics Applications, 8-12 October 2007, Villa Olmo – Como (Italy) – 

  • A. Pozio, A. Cemmi, “Degradation of electrodeposited catalysts for polymer electrolyte fuel cells”, International Workshop on Degradation Issue of Fuel Cells, 19-21 September 2007, Crete (Greece) – 

  • R. Oronzio, G. Monteleone, A. Pozio, M. De Francesco and S. Galli, “New reactor design for catalytic sodium borohydride hydrolysis”, World Hydrogen Technologies Convention, 4-7 November,  2007, Montecatini Terme, Italy – 

  • R. Oronzio, A. Pozio, M. De Francesco, G. Monteleone, S. Galli, “On-Demand Hydrogen Production from borohydride alkaline”, ICheaP-8 – The Eight International Conference on Chemical & Process Engineering, 24- 27 June 2007, Ischia, Napoli – 

  • A. Pozio, M. De Francesco, C. D’Angelo, M. Marrucci, “Commercial devices for hydrogen generation from alkaline borohydride”, Fuel Cells 2006 Science and Technology, Turin – Italy, September 13-14, 2006 – 

  • A. Pozio, R. F. Silva, “Surface conductivity and stability of metallic bipolar plate for PEMFC”, Fuel Cells 2006 Science and Technology, Turin – Italy, September 13-14, 2006 – 

  • A. Pozio, R. F. Silva, F. Mura. S. Passerini, “Solution-cast NafionTM composite membrane”, Fuel Cells 2006 Science and Technology, Turin – Italy, September 13-14, 2006 – 

  • A. Pozio, M. De Francesco, A. Cemmi, M. Cerboni, R. Pellegrini, M. Graziani, “Chimet Electrocatalysts for PEFC”, Fuel Cells 2006 Science and Technology, Turin – Italy, September 13-14, 2006 – 

  • G. Caputo, C. Felici, A. Diaconia, S. Sau, A. Pozio, M. De Francesco, “Development of Separation Processes Based on Membrane Technology for the S-I Thermochemical Cycle”, AIChE 2006 Spring National Meeting, Orlando (FL), April 26th, 2006

  • S. Galli, I. Lagana’, G. Monteleone, A. Pozio, J. Wu, “Polymer Electrolyte Fuel Cell Design for Low-Pressure Operation”, First European Fuel Cell Technology and Applications Conference, December 14-16, 2005, Rome, Italy – 

  • A. Pozio, R.F. Silva, “Surface conductivity and stability of metallic bipolar plate materials for PEMFC.”, First European Fuel Cell Technology and Applications Conference, December 14-16, 2005, Rome, Italy – 

  • A. Pozio, M. De Francesco, J. Wu, A. Cemmi, M. Cerboni, R. Pellegrini, M. Graziani, “Chimet Electrocatalysts for PEFC”, 12th Symposium on Relations between Homogeneous and Heterogeneous Catalysis – ISHHC12, Florence – ITALY, July 18-22, 2005 – 

  • S. Galli, M. Granati, I. Lagana’, G. Monteleone, A. Pozio, “Design, manufacturing and testing of a low-pressure polymer electrolyte fuel cell.”, HYPOTHESIS VI – La Habana (Cuba) – May 8-12, 2005 – 

  • S. Galli, A. Pozio, R. Lo Presti, M. Lupo, A D’Anzi, “Performance evaluation of a polymer electrolyte fuel cell realized by Membrane Electrode Gasket Assembly (MEGA) technology”, 2002 Fuel Cell Seminar, November, 18-21, 2002, Palm Springs, California, USA – 

  • M. De Francesco, A Pozio, R.F. Silva, L. Giorgi, F. Cardellini, “A Novel Method to Prepare Electrocatalysts for Polymer Electrolyte Fuel Cell”, 4thInternational Conference on Electrocatalysis, September 22-25, 2002, Como, Italy – 

  • A. Pozio, L. Giorgi, C. Bracchini, R. Giorgi, S. Turtu’, “Behaviour of Pt/C, Ru/C, Pt-Ru/C and Pt-Mo/C Electrocatalyst in Presence of H2/CO”, 4thInternational Conference on Electrocatalysis, September 22-25, 2002, Como, Italy

  • P. Ascarelli, V.Contini, R. Giorgi, L. Giorgi, A. Pozio, “Relation among Electronic Structure, Particle Size Distribution and Electrochemical Activity of Pt-based Nanosized Electrocatalysts”, 4th International Conference on Electrocatalysis, September 22-25, 2002, Como, Italy – 

  • L. Giorgi, A. Pozio L. Giorgi, S. Galli, R. Lo Presti, M. De Francesco, A. Danzi, “Membrane Electrode Gasket Assembly (MEGA) Technology for Polymer Electrolyte Fuel Cell”, Fuel Cells Science and Technology 2002, September 25-26, 2002, Amsterdam, NL – 

  • P. Prosini, A. Pozio, S. Botti, “A Preliminary Electrochemical Characterization of Carbon Nanotubes in Acidic Media”, Fuel Cells Science and Technology 2002, September 25-26, 2002, Amsterdam, NL – 

  • M. Ceraolo, R. Figlioli, C. Miulli, A. Pozio, “A Dynamical Model of Proton Exchange Membrane Fuel Cell”, The 18th International Electric Vehicle Symposium and Exhibition,  October 20- 24, 2001, Berlin, Germany – 

  • L.Giorgi, E. Simonetti, A. Pozio, R. Lo Presti, M. Pasquali, A. Dell’Era, “Influence of oxidant gas composition on the behavior o molten carbonate fuel cell with LiCoO2 and LiMg0.05CoO2 cathodes”, 200th Meeting of the Electrochemical Society and 52th Meerting of International Society of Electrochemistry, 2-7 September 2001, S. Francisco (USA) – 

  • S. Galli, L. Giorgi, A. Pozio, F. Scola, “Flow field design and testing for PEM bipolar plate”, 7th  Grove Fuel Cell Symposium, 11-13 september 2001, London, UK – 

  • L. Giorgi, A. Pozio, A. Cemmi, C. Cento, M. De Francesco, S. Galli, R. Lo Presti, “Caratterizzazione di Celle a Combustibile ad Elettrolita Polimerico”, GEI 2001, 20-22 September 2001, Lecce, Italy – 

  • A. Pozio, M. De Francesco, A. Cemmi, F. Cardellini, L. Giorgi, “Procedure for comparing high surface Pt/C catalysts”, 4th International Symposium on New Materials for Electrochemical System, July 9-13, 2001, Montreal, Quebec, Canada – 

  • A. Pozio, M. De Francesco, A. Cemmi, F. Cardellini, L. Giorgi, “Comparison of high surface Pt/C catalysts by XRD and cyclic voltammetry”, 6th Italian Meeting on Nanophase Materials, May, 9-10, 2001, Rome – 

  • A. Iacobazzi, M. Ronchetti, L. Giorgi, A. Pozio, “Celle a Combustibile ad Elettrolita Polimerico: Linee di Sviluppo di Stack”, SCI 2000, Societa’ Chimica Italiana, Giugno 2000, Rimini – 

  • A. Pozio, L. Giorgi, E. Passalacqua, “Electroxidation of H2 on Pt/C Pt-Ru/C and Pt-Mo/C anodes for polymer electrolyte fuel cell”, 2000 Fuel Cell Seminar, October 30-November 2, 2000, Portland, Oregon, USA – 

  • L. Giorgi, A. Moreno, A. Pozio, E. Simonetti, “Cathode Materials for Molten carbonate Fuel cells”,1999 Joint International Meeting (ISE/ECS), October 17-22, 1999, Hawaii, USA – 

  • A. Pozio, L. Giorgi, C. Bracchini, E. Antolini, “Hydrogen oxidation reactionon binary electrocatalysts for PEFCs”, 4th Korea-Italy Joint Symposium on Fuel Cells, 11-12 October 1999, Messina, Italy – 

  • A. Pozio, L. Giorgi, C. Bracchini, E. Passalacqua, “Comportamento di elettrocatalizzatori Pt-Ru e Pt-Mo in presenza di miscele H2/CO”, Pile a combustibile tecnologie e materiali, Associazione Italiana di Metallurgia, 23 giugno 1999, Milano – 

  • A. Pozio, L. Giorgi, E. Antolini, E. Passalacqua, “Influenza della struttura di elettrodi a diffusione gassosa sulle prestazioni di catodi per PEFC”, Pile a combustibile tecnologie e materiali, Associazione Italiana di Metallurgia, 23 giugno 1999, Milano – 

  • A. Pozio, L. Giorgi, E. Antolini, E. Passalacqua, “Comparison of CO tolerance of Pt-Ru and Pt-Mo anodes for PEFCs”, 50th ISE Meeting, 5-10 September 1999, Pavia, Italy – 

  • A.Pozio, “Elettrocatalizzatori anodici per celle a combustibile ad elettrolita polimerico: stato dell’arte e linee di sviluppo”, GEI 1999, 4-6 November 1999, Como, Italy – 

  • L. Giorgi, A. Pozio, C. Bracchini, “Electrochemical behaviour of CO tolerant Pt-Ru alloys as anode catalyst for PEFCs”, GEI 1998, Luigi Galvani Anniversary Meeting, 23-26 September 1998, Bologna Italy – 

  • C. Bracchini, L.Giorgi, A. Pozio, R. Giorgi, V. Indovina, S. Turtu’ and E.Passalacqua, “Pt, Ru and Pt-Ru Catalysts Dispersed on Carbon: Structural and Catalytic Characterisation”, GEI 1998, Luigi Galvani Anniversary Meeting, 23-26 September 1998, Bologna Italy – 

  • L. Giorgi, A. Pozio, E. Antolini, C. Bracchini, R. Giorgi, S. Turtu’, P. Ascarelli, E. Passalacqua, “Effect of the heat treatment on the electrochemical properties of low Pt loading cathodes for PEFCs”, 49th Annual Meeting of International Society of Electrochemistry, 13-18 September 1998, Kitakyushu, Japan – 

  • L. Giorgi, A. Pozio, “Characterization of solid polymer electrolyte fuel cell cathodes by ac-impedance spectroscopy”, 4th Int. Symposium on Electrochemical Impedance Spectroscopy, 2 7 August 1998, Rio de Janeiro, Brazil – 

  • P. Ascarelli, R.Giorgi, S. Turtu’, L. Giorgi, A. Pozio, “Nanophase metal catalysts in electrodes for polymer electrolyte fuel cells”, IV Convegno Nazionale Materiali Nanofasici, 18 19 May 1998, Rome, Italy – 

  • E. Antolini, L. Giorgi, E. Passalacqua, A. Pozio, “Influence of the Teflon in the diffusion layer and NafionTM in the catalytic layer on the performance of low-Pt loading cathodes for PEFC “, 3rd Korea-Italy Joint Symposium on Fuel Cells, 27-28 October 1997, Taejon, Korea – 

  • E. Simonetti, L. Giorgi, F. Zarzana, A. Pozio, “Studio della reazione di riduzione dell’ossigeno su oro, ossido di nichel e cobaltite di litio mediante voltammetria ciclica in carbonati alcalini fusi a 650 C .”, GEI 1997, Giornate Elettrochimica Italiana, 17 20 Settembre 1997, Belgirate – 

  • R. Coppola, M. Magnani, A. Lapp, L.Giorgi, A. Pozio, C. Bracchini, ” Studio della microstruttura di elettrodi catalizzati per celle a combustibile ad elettrolita polimerico mediante diffusione neutronica a basso angolo.”, GEI 1997, Giornate Elettrochimica Italiana, 17 20 Settembre 1997, Belgirate – 

  • L. Giorgi, E. Antolini, A. Pozio, “Influenza del contenuto di PTFE sulle prestazioni di catodi con basso carico di platino per celle a combustibile ad elettrolita polimerico.”, GEI 1997, Giornate Elettrochimica Italiana, 17 20 Settembre 1997, Belgirate – 

  • L. Giorgi, E. Antolini, A. Pozio, “Effetto del contenuto di NafionTM nello strato catalitico sulle prestazioni di catodi a basso contenuto di platino per celle a combustibile ad elettrolita polimerico.”, GEI 1997, Giornate Elettrochimica Italiana, 17 20 Settembre 1997, Belgirate – 

  • L. Giorgi, E. Antolini, A. Pozio, E. Passalacqua, “Influence of PTFE content in the diffusion layer of low-Pt loading electrodes for polymer electrolyte fuel cells.”, 1997 Joint International Meeting (ISE/ECS), August 31 – September 5 1997, Paris, France – 

  • P. Ascarelli, R. Giorgi, S. Turtu’, G. Zollo, L. Giorgi, E. Antolini, A. Pozio, “Anomalous Behaviour of Surface Chemical Species in Solid Polymer Fuel Cell Materials Evidenced by XPS.”, Application of Surface and Interface Analysis ECASIA97, June 16 – 20 1997, Goteborg, Sweden – 

  • R. Giorgi, T. Dikonimos Makris, P. Delogu, S. Turtu’, L. Giorgi, E. Antolini, A. Pozio, “A Photoemission study of the electronic properties of doped LiCoO2“, Application of Surface and Interface Analysis ECASIA97, June 16 – 20 1997, Goteborg, Sweden – 

  • E. Antolini, L. Giorgi, A. Pozio, “Studies of gas diffusion electrodes for polymer electrolyte fuel cells: effect of polytetrafluoroethylene content on the microstructure of the diffusion layer.”, EUROMAT, 5th European Conference on Advanced Materials, Processes and Applications, 21-23 Aprile 1997, Maastricht – 

  • L. Giorgi, A. Pozio, E. Passalacqua, “Studio mediante spettroscopia di impedenza elettrochimica di elettrodi a diffusione gassosa Pt/C e Pt/C/NafionTM“, GEI 1996, Giornate Elettrochimica Italiana, 18-21 Settembre 1996, Palermo – 

  • L. Giorgi, A. Pozio, E. Passalacqua, “Caratterizzazione elettrochimica di elettrodi per celle a combustibile ad elettrolita polimerico”, GEI 1996, Giornate Elettrochimica Italiana, 18-21 Settembre 1996, Palermo – 

  • M. Casarci, G. M. Gasparini, A. Pozio, L. Sanfilippo, “R.E.S.EC a computer simulation program for rare earth separation process”, ISEC ’96, International Solvent Extraction Conference, 19-23 March 1996, Melbourne, Australia – 

  • L. Giorgi, E. Simonetti, A. Pozio, F. Zarzana, “Stabilita’ di elettrodi porosi in carbonati fusi: confronto fra LixNiO, La0,8Sr0,2CoO3 e LixCoO2“, GEI 1995, Giornate Elettrochimica Italiana, 24 27 Settembre 1995, Riccione – 

  • C. Bracchini, C. Di Biasio, E. Giacometti, L. Giorgi, R. Coppola, A. Pozio, “Caratterizzazione di materiali per celle a combustibile ad elettrolita polimerico (SPFC)”, GEI 1995, Giornate Elettrochimica Italiana, 24-27 Settembre 1995, Riccione – 

  • L. Giorgi, A. Pozio, “Nickel anodes in situ activation with cobalt in alkaline electrolyzers”, First World Conference on Environmental Catalysis, 1-5 Maggio 1995, Pisa, Italia – 

  • L. Giorgi, A. Pozio, “Attivazione in situ con cobalto di anodi di nichel per elettrolizzatori alcalini”, GEI 1994, Giornate Elettrochimica Italiana, abstr. n. XX, 11-14 Ottobre 1994, Padova – 

  • M. Carewska, F. Croce, L. Giorgi, A. Pozio, S. Scaccia, E. Simonetti, “Investigation on the kinetics and stability of NiO(Li) and La0,8Sr0,2CoO3 in molten carbonates by means of electrochemical impedance spectroscopy”, European Workshop on electrochemical technology for molten salts, 14-17 Marzo 1993, Sintra (Portugal) – 

  • M. Carewska, F. Croce, L. Giorgi, A. Pozio, “Studio di ossidi misti ceramici conduttori per la realizzazione di catodi alternativi per MCFC”, Seminario Pile a combustibile, Associazione Italiana di Metallurgia, 14-15 Dicembre 1992, Milano – 

  • Ciancia, L. Giorgi, A. Pozio, E. Simonetti, “Caratterizzazione elettrochimica di componenti funzionali per MCFC mediante una cella a tre elettrodi in scala di laboratorio, Seminario Pile a combustibile, Associazione Italiana di Metallurgia, 14-15 Dicembre 1992, Milano – 

  • L. Giorgi, A. Pozio, E. Simonetti, “Study on the Interfacial Characteristics of Porous Nickel Electrode for Molten Carbonate Fuel Cell by means of Electrochemical Impedance Spectroscopy”, 1992 Fuel Cell Seminar, 29 Novembre 2 Dicembre 1992, Tucson, Arizona, USA – 

  • L. Giorgi, A. Pozio, E. Simonetti, F. Croce, “Electrode Kinetics of oxygen reduction on porous nickel in carbonate melt”, Second International Symposium on electrochemical impedance spectroscopy, 12-17 Luglio 1992, Universita’ della California, Santa Barbara, California, USA – 

  • L. Giorgi, A. Pozio, E. Simonetti “Characterization of MCFC cathode by means electrochemical impedance spectroscopy”, IFCC, International Fuel Cell Conference, 3-6 Febbraio 1992, Makuhari (Giappone) – 

  • L. Giorgi, A.Pozio, E. Simonetti, “Caratterizzazione di catodi per celle a combustibile a carbonati fusi mediante spettroscopia di impedenza elettrochimica”, GEI 1991, Giornate Elettrochimica Italiana, abstr. n. C7, 16-19 Settembre 1991, Modena –